高阶谐波控制对旋翼桨-涡干扰载荷和噪声的影响

直升机小速度平飞和斜下降飞行时会产生严重的桨-涡干扰(BVI)噪声。基于修正Beddoes尾迹/桨叶动力学耦合方法和Farassat 1A公式,建立了一个新的能够计入高阶谐波控制(HHC)影响的旋翼桨-涡干扰气动载荷和噪声计算模型。在该模型中,高阶谐波控制引起的桨尖涡附加位移通过对高阶入流进行时间积分推导得出,而单一阶次的谐波输入引起的各阶谐波响应通过传递函数来确定,传递函数则由桨叶的动力学特性计算。首先对HARTⅡ旋翼斜下降飞行状态的桨-涡干扰气动载荷进行了计算模拟,验证了所建立方法的可靠性。然后,着重研究了在典型的三阶谐波桨根激励下,不同输入相位对HARTⅡ旋翼桨-涡干扰气动载荷和噪声特性的影响。结果表明:桨叶的动力学特性尤其是扭转特性对高阶谐波控制效果影响显著,且高阶谐波输入的相位选择对桨-涡干扰噪声的控制至关重要,若控制相位选择不当,反而会增大旋翼噪声。     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

基于空间矢量脉宽调制的过调制策略研究

在电机控制中,过调制算法能够显著提高逆变器输出的电压,对提高电机转速有着重要意义。为了改善空间矢量脉宽调制对直流母线电压利用率不足的缺点,研究了基于空间矢量脉宽调制的单模式过调制算法,对输出电压基波幅值与其谐波含量进行理论分析。针对过调制区实际输出电压基波幅值与参考电压不一致这一问题,对目标调制比与给定调制比的关系作出可控性分析,作出拟合曲线并求出函数关系,最后对该过调制算法进行了仿真研究和试验验证。仿真分析和试验验证结果均证明了理论分析的正确性和可行性。     

基于小波变换和支持向量机的开关电流电路故障诊断新方法

针对开关电流(Switched current,SI)电路的故障诊断和定位问题，为进一步提高故障诊断准 确率，提出了基于小波变换和粒子群优化(Particle swarm optimization，PSO)支持向量机 (Support vector machine，SVM)的开关电流电路故障诊断新方法。该方法首先对节点电流 信号进行蒙特卡罗分析，然后通过小波分解计算分形维数，再利用核主元分析（Kernel pri ncipal component analysis，KPCA）降低特征值维数，实现最优故障特征的提取。最后通 过PSO SVM完成对各种故障模式的分类。对六阶切比雪夫低通滤波器进行了仿真实验验证， 获取了较高的故障诊断准确率，与其他方法进行比较，实验结果显示了本文方法的优越性。     

基于小波变换的航空发动机性能衰退率计算方法

由于航空发动机的工作环境复杂,性能参数测量值中夹杂的工况信息和测量误差会对发动机的性能衰退率计算产生较大的影响。为了弱化工况信息和测量误差对航空发动机性能衰退率计算的影响,本文首先运用多层小波分解与重构的方法对原始性能参数进行了趋势分量的提取,进而运用线性回归的方法对航空发动机的性能衰退率进行了计算。经过实际运维数据的验证,本文提出的航空发动机性能衰退率计算方法能够为实际工程应用提供理论支持。     

基于中值滤波和小波变换的混合滤波方法在推进剂监测中的应用

目前,监测传感器传出信号中混有很多噪声,为提高信号可信度,需要一种有效的信号处理方法。文章基于Matlab仿真环境,完成了信号仿真和滤波算法的设计,重点对单传感器仿真信号的去噪和多传感器信息融合进行了研究,提出了基于中值滤波和小波阈值滤波的混合滤波方案和基于Kalman滤波的信号融合方案。研究工作有:基于高斯白噪声和脉冲噪声的数学特性,合理假设出5种基本信号形式;依据实际数据,完成单传感器和多传感器信号仿真,确定信噪比和均方根误差作为去噪评定指标;综合分析现有的滤波算法的滤波特性,利用不同长度滑动窗口的中值滤波处理实验信号,选取合适长度的滑动窗口。设置对比实验确定小波阈值滤波中的小波基函数选取、阈值计算和分解尺度等参数;融合中值滤波和小波阈值滤波优势,设计混合滤波方案,去除单传感器仿真信号中的噪声;研究信息融合理论在泄漏监测系统中的应用,设置不同融合方式下的对比实验,确立最佳融合方式下的Kalman滤波方案,实现多传感器信息融合。     

基于小波包变换及相关系数法的复合材料层合板冲击位置识别研究

复合材料较为广泛应用于航空、航天等工程领域,但对冲击载荷十分敏感。因此,对复合材料结构承受的冲击载荷进行在线监测以及冲击位置的实时识别具有重要意义。文章以复合材料层合板为研究对象,基于两个冲击位置的距离越靠近则接收到信号幅频特性相似度越高的特点,采用FBG光纤光栅传感器,通过小波包变换的方法来提取能量特征向量,同时结合相关系数法来实现复合材料层合板的冲击位置识别。在480 mm×480 mm的复合材料层合板上开展冲击实验,8次实验皆完成了冲击位置识别,其中7个点距离误差为0 mm,实现精准识别,另一个点误差在6%以内。     

强光光学零件加工误差频谱分析与控制方法研究

本文利用功率谱密度分析磁流变抛光表面的敏感频率误差,发现走刀步距与中高频误差具有直接的关联性,通过小波算法确定其分布区域后,采用大束径的光顺抛光法对敏感频率误差进行控制,测试结果表明中高频误差得到了有效控制。本研究对强光光学零件加工误差的频谱分析、表征和控制具有指导意义。     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.